• Filter

MadgeTech's new RFC1000-CE is a powerful wireless receiver for use with the RFOT, Therm-A-lert and RF2000A Series of data loggers and is CE approved for the European market. The RFC1000-CE transmits to other RFC1000-CEs up to 2500 feet outdoors/line of sight, 700 feet typical indoors/urban. The RFC1000-CE transmits to data loggers up to 2000 feet outdoors/line of sight, 500 feet typical indoors/urban. Additional RFC1000-CEs can be used as repeaters to transmit greater distances. This new RFC1000-CE also includes an external antenna, allowing more flexibility with mounting positions in both orientation and proximity to metal walls. This may be used as a repeater, or directly plugged into the PC.

Splash proof wireless transceiver for the RFOT, Therm-A-Lert and RF2000A Series of Data Loggers. Includes MadgeTech Software, Software Manual, Quick Start Guide, USB to mini USB adapter and RFC1000-IP69K wireless transceiver. This new splash proof transceiver can be installed directly in the wash down location, ensuring 100% communication throughout the entire process. MadgeTech has gone through extensive testing to ensure that the new RFC1000-IP69K can withstand wash down cycles using caustic chemicals, making it ideal for harsh environments. This model includes a high powered transceiver with an IP69K ingress protection rating. The RFC1000-IP69K has a substantial transmit range, providing better performance in occluded environments such as ovens and refrigerators. This new The RFC1000-IP69K also includes an external antenna which is protected by a neoprene boot, allowing more flexibility with mounting positions in both orientation and proximity to metal walls. The RFC1000-IP69K is designed to communicate between MadgeTech’s two-way wireless data loggers and the MadgeTech software and can connect to a maximum of 64 data loggers.

Category: Probes

The RFOT-HDA is a probe attachment for the RFOT data logger. The device is built for use with hot dogs, sausages, and other small meat products. To use, simply slide the RFOT-HDA over the RFOT probe, then mount in place using two set screws. Next, insert a meat product through the o-ring onto the probe. The RFOT-HDA will guide the product into place, ensuring that the probe is inserted into the center of the product. Internal temperature can then be logged and analyzed using the RFOT data logger. The RFOT-HDA is also available in a smaller version called the RFOT-HDA-SM, which can be used with the RFOT-SMP (2.5" probe) data logger.

Category: Probes

Precision 100 Ohm, 4 wire RTD probe, with a 6" or 12" sheath.

Category: Probes

100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath.

Category: Weather

Tipping-bucket rain gauge for use with the Event101A data logger.

Category: O-Rings

One set of replacement o-rings for the RFOT.

Category: O-Rings

One set of replacement o-rings for RHTemp1000, RHTemp1000SS (not available for Intrinsically Safe products)