You have 0 items in your cart.
Kyoritsu
Sub Categories
Category:
Load current clamp sensors
Applicable model 5010/5020 Conductor size Φ40 Rated current AC 500A Output voltage AC 500mV/500A (AC 1mV/A) Accuracy |±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz) Withstand voltage AC 5350V for 5 seconds Cable length Approx. 2m Output connector MINI DIN 6pin Operating temperature ranges 0~40ºC, less than 85% RH (without condensation) Output impedance Approx. 1.9Ω Applicable standards IEC 61010-1:2001,IEC 61010-2-032:2002,CAT.III 600V pollution degree 2 Dimensions 128(L) x 81(W) x 36(D) mm Weight Approx.260g Accessories 9095 (Portable case), Instruction manual, Cable marker Option 7146 (Banana Φ4 adjuster plug)7185 (Extension Cable)
Category:
Load current clamp sensors
Applicable model 5010/5020 Conductor size Φ55 Rated current AC 1000A Output voltage AC 500mV/1000A (AC 0.5mV/A) Accuracy |±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz) Withstand voltage AC 5350V for 5 seconds Cable length Approx. 2m Output connector MINI DIN 6pin Operating temperature ranges 0~40ºC, less than 85% RH (without condensation) Output impedance Approx. 1.5Ω Applicable standards IEC 61010-1:2001,IEC 61010-2-032:2002,CAT.III 600V pollution degree 2 Dimensions 170(L) x 105(W) x 48(D) mm Weight Approx.360g Accessories 9094 (Portable case), Instruction manual, Cable marker Option 7146 (Banana Φ4 adjuster plug)7185 (Extension Cable)
Category:
Leakage current clamp sensors
Applicable model 5000/5001, 5010/5020, 6310 * Cannot be used for power measurement.
Category:
Leakage current clamp sensors
Applicable model 5000/5001, 5010/5020, 6310 * Cannot be used for power measurement.
Category:
Leakage current clamp sensors
Applicable model 5000/5001, 5010/5020, 6310 * Cannot be used for power measurement.
Category:
Leakage Clamp Meters
Digital clamp meter with tear drop shaped, medium size transformer jaws specially designed for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal for connection to recorders and facility to operate from external power supply permit continuous leakage current monitoring.
Category:
Leakage Clamp Meters
Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal.
Category:
Leakage Clamp Meters
Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement. • True RMS enables an accurate measurement for distorted waveforms. • Measurement from mA up toAC 1000A • Frequency filter switch to eliminate the effect of the harmonics. • 2 way analogue output terminal:AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.