You have 0 items in your cart.
TES-Taiwan
TES New
Sub Categories
Category:
Milli-Ohmmeter
Best resolution 1μΩ. Accuracy 0.05% 5A (120 mΩ) max. test current. Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.) Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement) Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for Hi and Lo. Readings Hold function. Cable length measurement. The length unit can be selected between Meter (M) and Feet (FT). Resistance measurement results excluding cable resistances. Memory of 3,000 measurement data. Large LCD (5-digit) with backlight (users can choose to disable it). Rechargeable batteries and AC adaptor. Low battery (voltage) alarm. Low power consumption. Communicate with PC via RS232C (to USB bridge) cable. Application: various low-resistance (cables) measurement; contact resistance measurement, …etc.
Category:
Luminous Flux Meter
4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Auto ranging from 0.05 to 7000 lumens. Accurate and Instant response. Data Hold function. Data memory and read function. Zero function. Ratio function. Sort function. Comparator function. Best for measuring : LEDs, Small lamps, Fiber illuminators. Auto power off function. RS232 Interface. Easy to use. Adapters kit : 2/3/4/5/8/10m/m
Category:
Color Meter
Check the color difference between two samples. Color difference displayed Δ(L*,a*,b*) Δ(E*ab,C*ab, H*ab) Δ(Y, x, y) Δ(X, Y, Z) or Δ(Rs, Gs, Bs) Color space displayed (L*, a*, b*) (L*, C*ab, hab) (Y, x, y) (X, Y, Z) or (Rs, Gs, Bs) Maximum, Minimum and Average function. Tolerance function. Auto memory (99 sets) & Read function. RS232 interface.
Category:
Multimeter
3-3/4 Digital LCD with bar-graph Water-Proof ABS housing Auto-power off Ohms, Diode Audible continuity, Capacitance input Overload protection to 600 Vrms
Category:
DC/AC Current Clamp Meter
DC/AC 0.01A Resolution AC/DC 0.01A~200A 23mm Jaw Diameter One Touch Zero Temperature and Capacitance Auto Range V、 W 、Hz、℃、 3 3/4 Digits (4000 Counts) 0~9999 RPM(CM-04)
Category:
Calibrator
Simple & Easy to key-in the exact temperature value you need Dual LCD display to show the Reference Room Temperature at the same time Accept 11 different type of Thermocouple (K, J, E, T, R, S, N, L, U, B, C) Auto-Ramp & T function
Category:
Earth / Ground Tester
Capable of measuring earth voltage. Data hold , MAX / MIN function. Auto power off function: The timer operates automatically about 3 minutes when the " Test Button Switch " are pressed to keep the tester power on. 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.(unit can be hung from the neck for simplified measurement). Automatic warning when resistance of auxiliary earth. Spikes is in excess of tolerance. Designed to meet IEC1010-1 safety standard.
Category:
EMF Tester
50 MHz to 3.5 GHz frequency range. For isotropic measurements of electromagnetic fields. Non-directional (isotropic ) measurement with three-channel measurement probe. High dynamic range due to three-channel digital results processing. Configurable alarm threshold and memory function. Easy to use High frequency (RF) electromagnetic wave field strength measurement. Mobil phone base station antenna radiation power density measurement. Wireless communication applications (CW , TDMA , GSM , DECT). Wireless LAN (Wi-Fi) detection, installation. Spy camera, wireless bug finder. Cellular/Cordless phone radiation safety level. Microwave oven leakage detection. Personal living environment EMF safety. RF power measurement for transmitters.