Hioki C HiTester 3504 Series

Dual-band 1kHz/1MHz Capacitance Tester for High Speed Inspection of Multi-Layer Ceramic Capacitors (MLCC) on Taping Machines

Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance testers suited for large-capacitance MLCC inspections using a constant voltage.

3504-40: Basic model
3504-50: Adds GP-IB and BIN function
3504-60: Adds GP-IB, BIN function, and Contact Check

This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately.

For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

High speed measurement of 2 ms
• Supports C measurements with voltage dependency characteristics through the use of constant voltage testing (CV)
• Model 3504-60 can detect contact failure on all 4 terminals for increased reliability
• BIN function on the 3504-60/-50 is ideal for sorting machines
• Model 3504-40 offers high speed and affordability, perfect for integrating into taping machines
• In all models, contact error is constantly monitored during measurement, contributing to increased yield

Basic specifications (Accuracy guaranteed for 6 months)

Measurement parameters C (capacitance), D (loss coefficient tan δ)
Measurement range C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99000
Basic accuracy (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016
Measurement frequency 120 Hz, 1 kHz
Measurement signal level 100 mV (3504-60 only), 500 mV, 1 V rms
CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz)
Output impedance 5Ω (In open terminal voltage mode outside of the CV measurement range)
Display LED (six digits, full scale count depends on measurement range)
Measurement time 2 ms (Typ. value. Depends on measurement configuration settings)
Functions 4-terminal contact check function (3504-60 only)
BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C (all models standard), GP-IB (3504-50, 3504-60)
Power supply Selectable 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max.
Dimensions and mass 260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz)
Accessories Power cord ×1, Instruction manual ×1, Spare fuse ×1

Location

Ask about this product