You have 0 items in your cart.
By Brands
Brands
Category:
Wireless
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software. It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with one button operation making downloading and restarting easy. It is rated IP67, so it can be used in wet or underwater environments. *This device is not for use with intrinsically safe data loggers.
Category:
Interface Cables
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software. It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with one button operation making downloading and restarting easy. It is rated IP67, so it can be used in wet or underwater environments. *This device is not for use with intrinsically safe data loggers.
Category:
Bridge-Strain
The Bridge120 is a battery powered, miniature, stand alone bridge/strain data logger. The device features a 20Hz processing speed and a real-time clock module. The Bridge120 supplies a 2.5V excitation voltage and accepts voltage signals from strain gauges, load cells and other low-level, DC voltage sources. The data logger is perfect for monitoring stress, torque, strain, pressure conditions and data from many other sensors/transducers. User programmable Engineering Units allow the data to be presented in Volts, milliVolts, microVolts as well as the proper units being measured. This easy-to-use device can measure and record data for up to 32,767 measurements per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The Bridge120 data logger makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
Category:
Bridge-Strain
The Bridge101A is one of MadgeTech’s newest data loggers. It is part of a new series of low cost, state-of-the-art data logging devices. MadgeTech has taken the lead in offering the most advanced, low cost, battery powered data loggers in the world today. The Bridge101A offers a multiple start/stop function, ultra-high speed download capability, 1 million reading storage capacity, optional memory wrap, battery life indicator, optional password protection, programmable alarms and more. The Bridge101A is priced at $499 each and can be delivered from stock now. Our research has shown that the Bridge101A is second to no other data logger when it comes to price and performance. Using the MadgeTech Software, starting, stopping and downloading from the Bridge101A is simple and easy. Graphical, tabular and summary data is provided for analysis and data can be viewed in V, mV and μV. The data can also be automatically exported to Excel® for further calculations. As the leader in low power data logger technology, MadgeTech continuously improves its products and develops solutions to meet ever-changing challenges. The Bridge101A was designed with our customers in mind. MadgeTech...
Category:
Fix type gas detector
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors and Reflex® sensor health check. All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and Modbus. A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. ...
Category:
Single gas detectors
The BW GasAlertClipExtreme is portable single gas detector designed for users with fixed-duration projects or those who need a go/no-go monitor that's lightweight, compact and easy-to-use. The GA24XT is entirely maintenance free for 24 months GasAlertClip Extreme - Waterproof 2-Year Disposable Gas Detector with Event Logging. Simply press the START/TEST button and the GasAlertClip Extreme is ready to use, providing two years of continuous, maintenance-free operation from the day of activation. The GasAlertClip Extreme is highly water-resistant, with an IP-66/67 housing fully immersible to a depth of one meter. The GasAlertClip Extreme housing includes a integral concussion-proof boot, and a heavy-duty, stainless steel, alligator style belt-clip. A large easy-to-read LCD shows detector life remaining, alarm set points, and peak alarm exposures. The detector's life remaining is displayed in months, days, then hours. A full function self-test veri?es sensor, circuitry and battery integrity as well as function of the audible, visual and vibrator alarms. Stored data can be transmitted directly by IR link to a cordless infrared printer for immediate printout, or to a personal...
Category:
Multi-gas detectors
The GasAlertMicroClip XT is designed to simplify multi-gas monitoring with a combination of ease of use, durability, compliance insurance, performance and affordability. The slim and compact BW GasAlert MicroClip XT provides affordable protection from atmospheric hazards. This multi-gas detector provides continuous visual confirmation of detector operation and compliance with the IntelliFlash™ feature and the simple one-button operation offers ultimate ease of use and significantly reduces time spent training. The GasAlert MicroClip XT is fully compatible with the BW MicroDock II automatic test and calibration system. Learn how to use your new Gas Detector with these videos In addition to the standard features found on BW Technology gas detector products, the GasAlert MicroClip XT also features: IntelliFlash gives you visual confirmation, with a flashing green light at the top of the unit that is easily seen by the user and supervisors, that device is in compliance which helps increase site safety and simplifies management of your gas detector fleet. Tamper-proof, one button operation Compatible with the motorized remote sampling pump, typically needed for confined space...
Category:
Single gas detectors
The bright, large LCD shows real-time gas concentrations and the instrument's status at all times. The full function self-test verifies sensor, circuitry and battery integrity and activates the audible/visual alarms each time you turn the instrument on. The detector clearly advises the gas hazard present-Low, High, TWA and STEL gas alarm. Recorded TWA, STEL and Peak exposures can be displayed on demand. GasAlert Extreme provides extraordinary cost of ownership advantages. These include automated calibration, 3-year lithium battery (available in local stores) and simple, one button control. Each of these features lowers your training and maintenance costs. Operated by an advanced micro-controller and an electrochemical sensor, the GasAlert Extreme is equipped with high output audible / visual alarms. The compact, rugged GasAlert Extreme is designed with the most advanced RFI protection available today. Its IP 66/67 rating means its waterproof to 3ft (fully submerged) and the GasAlert Extreme also features a shock resistance concussion-proof boot. Delivered ready for use, simply clip the instrument to your pocket, belt or hard hat for unequalled protection. Supported...