You have 0 items in your cart.
By Brands
Brands
Sub Categories
Category:
Bar Graph Meter Relay
Compact and lightweight model in accordance with DIN standard DC 24V power supply designed for 4-point alarm and 2-wire transmitters Often used as a receiver of 2-wire or 4-wire transmitter (such as pH/ORP meters, conductivity analyzers and DO meters) Meas. range pH meter: pH; 0 - 14 70divisions (to be specified otherwise)
Category:
Fix type gas detector
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors and Reflex® sensor health check. All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and Modbus. A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. ...
Category:
H.V. Proving Unit (DCV)
Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads.
Category:
Digital Multimeters
High Accuracy, High Performance and Reliable Measurements • 0.09% basic DC accuracy • Large display with 6,000 counts • True-RMS Measurements • True-RMS or MEAN value detection mode can be selected * • Low-pass filter for motor drive measurements • User calibration function Safety design for industrial use • Complies with IEC 61010-1 CAT.IV 600V,CAT.III 1000V • Terminal shutter to prevent incorrect test leads' insertion in current terminals • Very wide operating temperature range from-10 to 55ºC
Category:
Digital Multimeters
FEATURES ● 4000 counts LCD with a maximum display of 3999.● Angled display design helps the user to identify the reading of value easier.● Auto ranging designed.● Range change function.● Continuity check.● Diode measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use. SPECIFICATIONS DC Voltage Ranges Resolution Accuracy Input protection 400.0mV 100μV ±(0.5%rdg+3dgt) 1000V DC 4.000V 1mV 40.00V 10mV 400.0V 100mV 1000V 1V ․Input impedance : 10MΩ AC Voltage Ranges Resolution Accuracy Input protection 400.0mV 100μV ±(1%rdg+5dgt) 800V AC 4.000V 1mV 40.00V 10mV 400.0V 100mV 750V 1V ․Input impedance : 10MΩ DC...
Category:
Interface Cables
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software. It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with one button operation making downloading and restarting easy. It is rated IP67, so it can be used in wet or underwater environments. *This device is not for use with intrinsically safe data loggers.
Category:
AC Clamp Meters
FEATURES ● Full auto range for V.A and Ω functions. ● Data hold function freezes the reading in dimly lit or hard to reach places. ● Low battery indication. ● Built-in buzzer for continuity test.● Safety design throughout with no exposed metal parts. Shielded banana plugs and recessed input terminals.● Ohm function ideal for checking continuity of relays transformers and motor coils. SPECIFICATIONS AC A 400A ±(2.0%rdg+3dgt) : 50/60Hz AC V 400 / 600V ±(1.2%rdg+3dgt) : 40-500Hz Ω 4kΩ ±(1.5%rdg+3dgt) Buzzer sounds < 100Ω Conductor size 27mm Max. Low battery Indication Dimensions 197(L) × 65(W) × 33(D)mm Weight (battery Included) Approx. 250g Power source 9V(6F22) × 1 Safety standard EN 61010-1 CAT II 600V EN 61010-2-32
Category:
Populated Board Testing
Data Creation System Delivers 90% Faster Data Generation, 93% Lower Line Stoppage Times The UA1780 enables high-quality test programs in a short period of time by using net information that has been reverse-generated from Gerber data and component information libraries, and delivers maximum performance when used in conjunction with Hioki’s new FA1240-50 flying probe tester.